Repair information 4-109
7562
8. Lift the operator panel assembly and turn it over.
9. Remove four screws (D) from the bottom, and remove the operator panel bottom cover.
Note: If you are removing the operator panel assembly to replace the OP panel speaker, then stop here and go
to step 2 of “OP panel bottom cover removal” on page 4-22.
10. Remove two screws (E), and remove the cave light from the OP panel bottom cover.
Note: If you are removing the operator panel assembly to replace the OP panel bottom cover, then stop here
and go to step 2 of “OP panel bottom cover removal” on page 4-22.
To Next Page
Loading...
