Lucent Technologies DDM-2000 OC-3 - Page 30

xxx
Issue 9 October 1998
363-206-204
Table 2-16. Fan Shelf Alarm Connections 2-46
Table 2-17. Color Code Cross Reference Connections 2-47
Table 2-19. IAO LAN Connector Pin Identification - Shelf End (P50) 2-48
Table 2-18. Universal Lightguide Buildouts 2-48
Table 2-20. IAO LAN Connector Pin Identification - Opposite End (RJ45 type) 2-49
3 Equipment and Front Access Cable Installation
Table 3-1. Front Access DS1 Cable Assemblies 3-25
Table 3-2. Front Access Shelf Cable Assemblies 3-26
Table 3-3. Front Access Mult Cable Assemblies 3-27
Table 3-4. Telemetry and Modem Cable Assemblies 3-28
Table 3-5. Front Access DS1 Transmission Connections 3-29
Table 3-6. Office Alarm Connections 3-30
Table 3-7. Parallel Telemetry Connections (See NOTE below.) 3-31
Table 3-8. Miscellaneous (Environmental) Discrete Telemetry Connections (RT) 3-32
Table 3-9. Miscellaneous (Environmental) Discrete Telemetry Connections (CO) 3-33
Table 3-10. Color Code Cross Reference Connections 3-34
4 Powering, Verification, and Circuit Pack Installation
Table 4-1. Release 13 Circuit Pack Compatibility (Sheet 1 of 2) 4-4
Table 4-2. DDM-2000 OC-3 Shelf Circuit Pack Codes 4-22
Table 4-3. SYSCTL Option Setting Guidelines 4-23
Table 4-4. Universal Lightguide Buildouts 4-24
5 Release 6 Installation Tests
Table 5-1. Universal Lightguide Buildouts 5-19
Table 5-2. Lightguide Jumpers 5-20
6 Release 7 Installation Tests
Table 6-1. Cross-Connections for DSX-1 Testing 6-21
Table 6-2. Ring Network Time Slot Assignments 6-22
Table 6-3. Universal Lightguide Buildouts 6-25
Table 6-4. Lightguide Jumpers 6-26
6-26
6-25
6-22
6-21
5-20
5-19
4-24
4-23
4-22
4-4
3-34
3-33
3-32
3-31
3-30
3-29
3-28
3-27
3-26
3-25
2-49
2-48
2-48
2-47
2-46