Lucent Technologies DDM-2000 OC-3 Installation Manual

Issue 9 October 1998
xxix
Lucent Technologies
Tables
About This Document
1 Introduction
Table 1-1. Miscellaneous Equipment 1-6
Table 1-2. Tools, Test Sets, and Accessories 1-7
2 Equipment and Rear Access Cable Installation
Table 2-1. DS1 Cable Assemblies 2-33
Table 2-2. DS3/EC-1 Cable Assemblies 2-34
Table 2-3. DS3/EC-1 Cable Assemblies (These cables are no longer available.) 2-36
Table 2-4. Telemetry, Modem and LAN Cable Assemblies 2-38
Table 2-5. Power, Alarm, and Synchronization Cable Assemblies 2-39
Table 2-6. DS1 Transmission Connections 2-40
Table 2-7. Power Connections 2-41
Table 2-8. Office Alarm Connections 2-41
Table 2-9. Parallel Telemetry Connections (See NOTE below.) 2-42
Table 2-11. TL1/X.25 Interface Connections 2-43
Table 2-12. Miscellaneous (Environmental) Discrete Telemetry Connections (RT) 2-44
Table 2-13. Miscellaneous (Environmental) Discrete Telemetry Connections (CO) 2-45
Table 2-14. DS1 Timing Reference Connections 2-46
Table 2-15. Order wire Interface Connections 2-46
2-46
2-46
2-45
2-44
2-43
2-42
2-41
2-41
2-40
2-39
2-38
2-36
2-34
2-33
1-7
1-6

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English