Starting the engine for driving / switching it off
4.1 Starting the engine from the driver's cab
4 - 16 3 302 709 en Operating manual
GMK5150L
12.01.2018
• Check the display (1) in the Start menu or in the Driving menu.
If the symbol is blue, then the steering angle is not correct based on
the 1st and 2nd axle lines.
• Steer using the steering wheel – the steering angle is automatically offset,
and the lamp (1) goes out.
Instrument panel After the engine start, several lamps must go out.
The lamp (3) only goes out when the vehicle
starts moving.
• Check that the lamps (1) and (2) go out.
If one or more lamps light up;
à Warning or
malfunction messages on the instrument panel
,
p. 8 - 5.
If the
Steering system warning (1) red lamp does not go off, then you must
perform the required checks before you start off;
à p. 8 - 5
G
Risk of accidents because the truck crane cannot be steered.
If the red
Warning, steering system lamp lights up, then stop as soon as
possible.
The affected axle lines can no longer be steeted, which can lead to serious
accidents even for reduced speeds.
To Next Page
Loading...
Need help?
General
