Rigging work
12.9 Rigging/unrigging the counterweight
Operating manual 3 302 709 en 12 - 109
GMK5150L
12.01.2018
12.9.9 Removing/installing the counterweight on the turntable
Removing With version 1 and 3 two 2.3 t plates, with version 2 one 9.2 t plates can be
removed/installed on the turntable.
Version 1 and 3
• Use automatic mode to lift the counter-
weight combination onto the turntable;
à Automatic mode rigging, p. 12 - 105.
• Unscrew the bolts (1) and remove the
clamp (2) from the bracket (3).
• Use automatic mode to lower the counter-
weight combination onto the turntable.
Version 2
• Secure the mounted 9.2 t plate using suita-
ble lifting gear so that the plate cannot fall
down during removal.
• Unscrew the bolts (1) and take off the
clamps (2).
• Remove the bracket (3) from the 9.2 t plate.
• Lift the 9.2 t plate off the turntable.
s
To Next Page
Loading...
Need help?
General
