Malfunctions during crane operation
14.5 Emergency operations and programs
Operating manual 3 302 709 en 14 - 43
GMK5150L
12.01.2018
14.5.4 Emergency operation with the hand-held control
If the power units no longer respond to the operating elements in the crane
cab, you can operate the power units with the hand-held control.
Operating them with the hand-held control is intended for emergencies only
and for bringing the truck crane into a safe state or to shut it down.
Connect the hand-held control
• Connect the hand-held control to the
connector (1).
All power units can be operated from this
connection.
Information on connecting;
à p. 12 - 25.
Starting the engine
• Press the button (1) once – the engine will start; à p. 10 - 10.
s
G
Danger of overturning due to deactivated monitoring function
The RCL is switched off and the crane operations are not monitored when
operating with the hand-held control. If you move into a critical range, the
truck crane will overturn.
To Next Page
Loading...
Need help?
General
