EasyManua.ls Logo

Manitowoc GROVE GMK5150L

Manitowoc GROVE GMK5150L
1040 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Driving
5.3 Driving the truck crane and switching it off
5 - 40 3 302 709 en Operating manual
GMK5150L
12.01.2018
5.3.3 Temposet
You can use Temposet to limit the maximum speed.
Switching on You can switch on Temposet only at speeds greater than 15 km/h (9 mph).
Press the button (1) once.
Temposet is now switched on. The symbol (2) is displayed in the Driving
display.
The current speed is taken as the maximum speed.
You can exceed the speed by pressing the accelerator as far down as it will
go (kick-down). The Temposet limits the speed again only once you release
the accelerator and press it again.
Increasing/reducing the maximum speed
Increase with (1)
Reduce with (2)
Press the corresponding button until the desired speed is reached
or
Press the corresponding button once. The speed will increase/decrease
by 1.0 km/h (0.6 mph)
Switching off
Press the button (1) once.
The Temposet is now switched off.

Table of Contents

Related product manuals