Rigging work
12.9 Rigging/unrigging the counterweight
12 - 76 3 302 709 en Operating manual
GMK5150L
12.01.2018
12.9.4 Slinging points on the counterweight sections
•
Only use lifting gear of sufficient load bearing capacity.
Weights;
à Counterweight parts, p. 1 - 14.
Sections
• Attach the counterweight sections at the slinging points (1).
Blocks
• Sling the blocks at the slinging points (1).
G
Risk of accident if used improperly
Attach the lifting gear to various counterweight section only at the appro-
priate slinging points. Ensure the lifting gear has sufficient load bearing
capacity.
Lift a maximum of two stacked 4.6 t plates. The slinging points of the other
plates are not designed for lifting stacked plates.
To Next Page
Loading...
