Manitowoc GROVE GMK5150L

Driving
5.2 Operating the transmission
5 - 32 3 302 709 en Operating manual
GMK5150L
12.01.2018
In manual
operating mode
In this operating mode, the transmission only shifts when you actuate the
gearshift lever.
Manual upshifting
To upshift, you must pull the gearshift lever upwards briefly:
The newly engaged gear will be shown in the display.
Manual downshifting
To downshift, you must press the gearshift lever downwards briefly:
The newly engaged gear will be shown in the display.
H
If you initiate a gear change which would cause the maximum permitted
engine speed to be exceeded, the transmission does not shift.
In that case, slow the truck crane down until a permissible engine speed is
reached, and downshift again.
– Upshifting one gear: Push up once
– Upshifting two gears: Briefly push upwards twice
– Upshifting three gears: Briefly push upwards three times
– Shift one gear down: Push downwards once
– Shift two gears down: Briefly push downwards twice
– Shift three gears down: Briefly push downwards three times