Malfunctions in driving mode
8.6 Tilting/lowering the driver's cab
8 - 46 3 302 709 en Operating manual
GMK5150L
12.01.2018
• Continue to pump until the driver's cab tilts no further.
• Secure the driver's cab – fold out the fall-back guard strut (1).
Lowering the
driver's cab
• Fold down the fall-back guard strut (1).
• Check that the lever is pointing (2) backwards (B).
• Use the lever to pump (1) – the driver's cab is lowered.
• Lower the driver's cab to its end position – the lock closes audibly.
• Switch on the ignition and check that the symbol (1) has gone out.
• If necessary, lower the driver's cab further until the symbol (1) goes out.
G
Risk of accidents due to the driver's cab tilting back.
You may only stand under the tilted driver's cab if the fall-back guard strut
is folded out.
G
Risk of accidents if the driver's cab is not locked.
Ensure that the driver's cab is locked afterwards every time it is lowered.
This prevents the driver's cab tilting forward when braking.
To Next Page
Loading...
Need help?
General
