Manitowoc GROVE GMK5150L

Operating elements for crane operation
9.1 Overview of the operating elements
Operating manual 9 - 5
GMK5150L
18 Outriggers:
– Control units
1)
– Control units for raising the axles
– Emergency stop switch
à p. 9 - 85
à p. 9 - 85
à p. 14 - 1
19 Slinging points
– For personal protective clothing
– For fall protection device
1)
à p. 12 - 151
à p. 12 - 151
20 Railings on the turntable
à p. 12 - 149
21 CraneSTAR system
à p. 11 - 158
22 Drive unit
2)
23 – Switching on the boom floating position
1)
– Switching off the boom floating position
1)
à p. 6 - 13
à p. 12 - 19
24 – Switching on boom pre-tensioning
1)
– Switching off boom pre-tensioning
1)
à p. 6 - 14
à p. 12 - 21
25 Reeving and unreeving the hoist rope
à p. 12 - 124
26 – Hook block
– Separable hook block
1)
– Hook block with ballast plates
1)
à p. 12 - 115
à p. 12 - 120
à p. 12 - 122
27 Fuel tank auxiliary heater
1)
à p. 11 - 5
28 Mirror for crane operation
à p. 12 - 150
29 Storage compartment
– Anemometer
– Hand-held control
à p. 12 - 145
à p. 12 - 23
30 Slewing gear:
– operation
– Switching off the slewing gear freewheel
1)
– Switching on the slewing gear freewheel
1)
– Turntable lock
1)
à p. 11 - 115
à p. 12 - 20
à p. 6 - 13
à p. 9 - 129
31 Hydraulic oil cooler, second cooler
1)
32 Main hoist à p. 9 - 114
33 Auxiliary hoist Operation
1)
Rigging the auxiliary hoist
1)
à p. 9 - 116
à p. 6 - 39
1)
Additional equipment
2)
à Maintenance manual