Additional page GMK 3 302 706 en 1
12.01.2018
Notwithstanding the information in the operat-
ing manual
supplied, crane movements are
blocked during travel.
After switching over to
driving position ā
symbol (1) green ā the symbol (2) remains
grey and the crane hydraulics
driving position is
switched off.
To carry out crane movements, you can stop
and switch over to the
Crane operation operat-
ing mode, as described in the supplied
operat-
ing manual
.
Driving from the crane cab
Crane movement partially blocked
To Next Page
Loading...
