Starting/switching off the engine – for crane operation
10.1 When starting the engine for the first time in the day
10 - 2 3 302 709 en Operating manual
GMK5150L
12.01.2018
When not driving from the crane cab:
• Remove the ignition key.
If you want to drive from the crane cab:
• Turn the ignition key to position 1.
Driving from the crane cab is enabled and the steering lock is prevented
from engaging while driving;
à Preparing to drive, p. 13 - 18.
H
Lock the driver's cab for protection against unauthorised use.
To Next Page
Loading...
