Overview
1.5 Technical data
1 - 22 3 302 709 en Operating manual
GMK5150L
12.01.2018
Main boom
Lattice extension As additional equipment;
à Lattice extension operating manual.
Operating speeds The specified operating speeds only apply to an engine speed of
about 1,500 rpm/1,850 rpm without load.
Main boom lengths: 11.4 m to 60.0 m (37.4 ft to 196.9 ft)
Main boom head: 6 sheaves
8 sheaves
1)
Cylinder: One single-level telescoping cylinder with
locking/unlocking mechanism
Power unit group
Telescoping mechanism: M 1 (to ISO 4301 - 2)
1)
Additional equipment
Main hoist: Rope speed when lifting
Normal speed: maximum 60 m/min (197 ft/min)
High-speed mode: maximum 120 m/min (394 ft/min)
Auxiliary hoist: Rope speed when lifting
Normal speed: maximum 60 m/min (197 ft/min)
High-speed mode: maximum 120 m/min (394 ft/min)
Slewing gear: 0 to 1.5 revolutions per minute (without load)
Telescoping mecha-
nism:
extend
from 0 - 0 - 0 - 0 - 0 to 100 - 100 - 100 - 100 - 100
about 400s In automatic mode during
uninterrupted locking and
telescoping processes
Derricking gear: Derricking between - 1° and 83°
High-speed mode: Raising: about 50 s
To Next Page
Loading...
