Rigging work
12.9 Rigging/unrigging the counterweight
12 - 112 3 302 709 en Operating manual
GMK5150L
12.01.2018
For driving with axle loads greater than 12 t
– The 2.3 t plates (1) and (2) are mounted on
the turntable,
– The 2.3 t base plate (6) and the 2.3 t plate (5)
lie on the counterweight platform,
– the 4,6 t counterweight blocks (4) lie on the
2.3 t counterweight section (5),
– the 4.6 t counterweight section (3) is
attached to the rear storage area.
Fasten the counterweight on the rear storage
area
• Fasten the holder (1) to the carrier.
• Place the 4.6 t counterweight block on the
holder (1).
• Secure the pins 4.6 t counterweight block
using the lashing straps (2) and (3).
To Next Page
Loading...
Need help?
General
