Rigging work
12.10 Rigging work on the main boom
Operating manual 3 302 709 en 12 - 147
GMK5150L
12.01.2018
Removing You must remove the rod with the anemometer/air traffic control light
before driving on the road.
• Switch off the air traffic control light.
• Remove the plug and close the sockets (5)
and (4) with the protective caps.
• Wind the cables on to the clamps (2).
• Take the rod (1) out of clamp (3).
For transport
• Place the rod (1) in the holder (2).
• Secure the rod (1) using the retaining pins.
To Next Page
Loading...
