Seite 19Alterations reserved Stand 05/2008
Operating manual T700/T800.1 - en
3.1.2 Feeder
Unscrew the feeder off the pallet
and lift it with a forklift
at positions 1 and 2 and
carry it to its final destination.
> ATTENTION < Make sure that flap 3
as well as air tubes and valves
behind it are not damaged!
> DANGER < Risk of injuries!
3.1.3 Folding units II and III
Unscrew the units II and III
off the pallet and lift them
with a forklift at cross bar 1.
> ATTENTION < The unit may fall (tip)
over wherefore two additional persons
are required to brace the unit.
Make sure that machine rollers 2
and castor wheel 3 will not be
damaged when dropping the unit.
3.1.4 Cleaning
> ATTENTION < Clean the machine, feeder, and delivery of rust preventing agents.
To Next Page
Loading...
