Page 74
Alterations reserved Stand 12/2002
Operating Manual T 700 / T 800 - R ENG
5.6.2 Electrical connection
Electrical connection occurs
through power plug 1 and
control plug 2 at control cabinet
of the previous folding unit.
Works without sub-folding unit
or delivery:
Insert dummy plug 3 into
socket “machine control” 4.
Due to their self control
mobile folding units may also
be connected to machines
of other manufacturers
or operated separately.
For this purpose, insert
power plug 1 to power supply
and control plug 2 into socket
“self-control” 6 at control cabinet 5.
Both units must be turned
ON and OFF separately.
>DANGER< Please bear in mind
that there is no joint disconnection
of MBO folding units and machines
of other manufacturers!
Manufacturer will not be liable
for any damages caused by
the missing of safety disconnections!
To Next Page
Loading...
