Page 43Alterations reserved Stand 12/2002
Operating Manual
T 700 / T 800 - R ENG
5.2 Feeder
5.2.1 Upper pile table
Set the lateral sheet stop 1 with
knurled grips 2 to ½ of sheet width;
use mm-scale 3.
For pile transportation ON/OFF:
Use blue button 4 at feeder table
or blue push button at
main control panel 7.
Place a bulk of sheets onto
the feeder table and
shingle 6 them with a spatula 5.
Bear in mind that maximum
loading height is approx. 8 cm.
Use extension bars 7 when you
process long sheet sizes.
Use rollers 8 for short oblong sheets.
To Next Page
Loading...
