Page 11Alterations reserved Stand 12/2002
Operating Manual
T 700 / T 800 - R ENG
1.6 Information to user/Functioning description
FOLDING MACHINE TO FOLD FLAT SHEETS
The folding machine is designed to fold flat sheets only. Folding of any other material should not be
attempted. The manufacturer or supplier would not be liable for any damage caused as a result.
Furthermore, the manufacturer would also not be liable for any malfunctions or damages of additional
installations or alterations which were not delivered or installed by him.
The construction of your machine may differ from the pictures in some details. However, this does
not have any influence to its safe operation. Since we are continuously working on further
developments, alterations are reserved.
The production speed can be varified between 10 and 205 mtrs./mte. However, the efficiency depends
on the type of paper, size and type of fold as well as to the different circumstances of the user which
cannot be influenced by the manufacturer.
In order to provide a general understanding of the machine function to the operator the following
description has been carried out from the feeder to the machine.
Please be advised that due to technical reasons and for better understanding certain options
are already described in the standard machine description.
The MBO Combination Folding Machine works exclusively in accordance with the principle of
buckle folding. It may be coupled with mobile knife folding units which work in accordance with the
principle of knife folding.
The basic machine consists of a combination of a parallel unit with continuous feeder, register table
and stream delivery. Additional buckle plate units II, III, and IV, mobile knife folding units, such as
Z 2, Z 5, and Z 6, special folding units or various other MBO deliveries may be attached, if necessary.
Standard buckle folding units consist of two, four or six buckle plates with swing deflectors, spiral
foldrollers which can be adjusted through quick setting elements on the side frame of the machine,
and quickly removeable slitter shafts with plug bearings.
Please bear in mind that a simultaneous folding with all buckle plates is not possible!
To Next Page
Loading...
