Page 89Alterations reserved Stand 12/2002
Operating Manual
T 700 / T 800.1 - FP ENG
P 4 2 x parallel fold (accordian fold), i.e. 6 pages
Set of foldrollers 1 and 2 to single
thickness of paper, and foldrollers 3-8
to triple thickness of paper.
Set sheet stop C 12 at 1st and 2nd
buckle plate to 1/3 of sheet length.
Buckle plates 3 and 4 are replaced by
sheet deflectors.
P 5 3 x parallel fold (accordian fold), i.e. 8 pages
Set foldrollers 1-3 for single
thickness and foldrollers 4-8 to
quadruple thickness of paper. Sheet
stop C 12 should be set to 1/4 of sheet
length at 1st, 2nd and 3rd buckle plate.
The 4th buckle plate is replaced
by a sheet deflector.
P 6 4 x parallel fold (accordian fold), i.e. 10 pages
Set foldrollers 1-4 to single paper
thickness, foldrollers 5-8 to fivefold
thickness of paper.
Set sheet stop C 12 to 1/5 of
sheet length at all 4 buckle plates.
P 7 3 x parallel fold (1 parallel + 2 letter folds), i.e. 12 pages
Set foldroller 1 to single paper
thickness, foldrollers 2-4 to double
thickness of paper, and foldrollers 5-8
to sixfold thickness of paper. Sheet stop
C 12 should be set to 1/2 of sheet length
at 1st buckle plate, and to 1/6 of sheet
length at 2nd and 4th buckle plate.
The 3rd buckle plate is replaced
by a sheet deflector.
To Next Page
Loading...
