27.4 Ethernet Connection
27.4.5 Setting communication interface (Communication settings)
27 - 69
25
BAR CODE READER
CONNECTION
26
PRINTER CONNECTION
27
CNC CONNECTION
28
MULTI-CHANNEL
FUNCTION
29
FA TRANSPARENT
FUNCTION
30
MULTIPLE-GT11
CONNECTION FUNCTION
31
GATEWAY FUNCTION INDEX
(from previous page)
*1 To connect the GOT with the Ethernet module (Q Series) in the one-on-one relationship using a cross cable, set
[Timeout Time] to 6 sec. or longer.
Example of communication detail settings
For examples of communication detail settings, refer to the following.
Section 27.4.10 CNC Side Settings
Item Description Range
Timeout Time
*1
Set the time period for a communication to time out.
<Default: 3 Sec>
3 to 90 Sec
Delay Time
Set the delay time for reducing the load of the network/destination
PLC.
<Default: 0ms>
0 to 10000 ( 10 ms)
To Next Page
Loading...
