30.1 System Configuration
30 - 3
25
BAR CODE READER
CONNECTION
26
PRINTER CONNECTION
27
CNC CONNECTION
28
MULTI-CHANNEL
FUNCTION
29
FA TRANSPARENT
FUNCTION
30
MULTIPLE-GT11
CONNECTION FUNCTION
31
GATEWAY FUNCTION INDEX
2 System equipment
(1) GOT
(2) Cable
Connection type applicable to the multiple-GT11 connection function
The multiple-GT11 connection function is available for the following types of
connection of the GOT and a MITSUBISHI PLC. For the system configuration
between the GOT and MITSUBISHI PLC, refer to the corresponding section.
• Direct CPU connection ( Chapter 3 DIRECT CONNECTION TO CPU)
• Computer link connection ( Chapter 4 COMPUTER LINK
CONNECTION)
*1
*1 Only for connection to QCPU (Q mode)
Image No. Name Model name
RS-232 interface
• For RS-232 communication
- (Built into GOT)
RS-422 interface
• For RS-422 communication
- (Built into GOT)
Image No. Name Model name
RS-422 cable
(To be prepared by the user. Section 30.2 Connection Cable)
RS-232 cable GT01-C30R2-9S(3m)
RS-232
RS-422
To Next Page
Loading...
