Name: Mitsubishi GOT1000 Series
Brand: Mitsubishi
Rating: 4 (1 reviews)

To Next Page

To Previous Page

17 - 10

17.3 Preparatory Procedures for Monitoring

The following shows the procedures to be taken before monitoring and corresponding reference sections.

Comfirming the PLC side setting

This section explains the GOT side setting.

When confirming the PLC side setting, refer to the following.

Section 17.4 PLC Side Setting

Install the OS onto the GOT.

Section 17.3.1

Installing OS onto the GOT

Make sure that the OS is installed on the GOT.

Section 17.3.2

Checking OS installation on GOT

Setting the communication interface (Communication

settings)

Section 17.3.3

Setting communication interface

(Communication settings)

Download the project data.

Section 17.3.4

Downloading project data

Attach the communication unit and connect the cable.

Section 17.3.5

Attaching communication unit and

connecting cable

Make sure that the GOT recognizes the connected

equipment.

Section 17.3.6

Verifying GOT recognizes connected

equipment

Make sure that monitoring is performed normally.

Section 17.3.7

Checking for normal monitoring

Questions and Answers:

Need help?

Do you have a question about the Mitsubishi GOT1000 Series and is the answer not in the manual?

Mitsubishi GOT1000 Series Specifications

General