Mitsubishi GOT2000 Series - Operation of Batch Self Check

4.1 Batch Self Check
4 - 3
4
MAINTENANCE
4.1.3 Operation of batch self check
■1. Batch self check
Step 1. Each time the Export item on system
status log is touched, the displayed
drive changes as follows: A drive → B
drive → E drive → Not exported → A
drive.
When selecting A drive or B drive, install
the SD card. When selecting the E
drive, install the USB memory.
If Batch self check is started without
installing the CF card or USB memory,
the system status log will not be saved.
(The system status log is for
manufacturer investigation only.
Customers cannot view it.)
Step 2. Touch the [Start] button to start Batch
self check.
Touch the [×] button to return to the
main menu.