Mitsubishi GOT2000 Series User Manual

2.10 Controller
2 - 43
2
GOT BASIC SETTING
2.10.5 Communication detail setting
■1. Communication detail setting
■2. Communication detail setting display operation
(1) Communication settings
POINT
POINT
POINT
(1) Communication parameter setting by GT Designer3
Set the communication parameters for each communication driver at [Communication
Settings] in [Controller Setting] of GT Designer3.
When change the communication parameters after downloading project data, change the
setting at communication detail setting of GOT.
➠ GOT2000 Series Connection Manual for the controller used
GT Designer3 (GOT2000) Help
(2) For the Ethernet multiple connection
Touch the driver display BOX of the Ethernet connection, and then the communication detail
setting screen of Channel No. 1 is displayed.
Function Description
Communication parameters
setting
Set various communication parameters of communication devices.
The settable parameters differ according to the communication device.
Keyword setting For the FX series PLCs, key word for protecting program in the PLC can be set.
Key word deleting For the FX series PLCs, key word for protecting program in the PLC can be deleted.
Key word protection cancel For the FX series PLCs, the program protection status in the PLC can be cancelled.
Keyword protection
For the FX series PLCs, the cancelled program protection status in the PLC can be returned to the protection status
again.
Step 1. Touch the driver display BOX of the
communication parameter to be set in
the communication setting screen.
Step 2. The screen switches to the detail setting
screen.
Set communication parameters from
this screen.
Refer to the following for the setting
change operation.
➠ 1.3.3 Basic operation of
settings change

Mitsubishi GOT2000 Series Specifications

General

Brand	Mitsubishi
Model	GOT2000 Series
Category	Control Panel
Language	English