Mitsubishi GOT2000 Series User Manual

2.10 Controller
2 - 35
2
GOT BASIC SETTING
2.10.3 Controller contents
This section describes setting items and display contents for a controller.
(1) Channel-Driver assign
(a) Assignment of communication drivers to channels
Communication drivers installed in the GOT can be assigned to channels.
Even without setting [Controller Setting] on GT Designer3, communication with controller is available by
assigning channel No. with this function.
➠ 2.10.4 Channel-Driver assign operation
(b) Changing the assignment of communication drivers to channels
Without using GT Designer3, the assignment of communication drivers to channels can be changed.
When change a communication driver, the alternative communication driver has to be installed in GOT in
advance.
(2) Standard interface display box
The standard communication interfaces of the GOT are displayed.
There are the following 4 types.
(3) Extension interface display box
The name of the unit installed in the extension interface is displayed.
(Displays [None] when any unit is not mounted.)
For details of each unit, refer to the following.
➠ GOT2000 Series User's Manual (Hardware)
RS-232 For communicating with a controller
RS-422/485 For communicating with a controller
USB (Device) For communicating with a personal computer (GT Designer3)
Ethernet For communicating with a personal computer (GT Designer3) or a controller
(1)
(6)
(4)
(2)
(5)
(3)

Mitsubishi GOT2000 Series Specifications

General

Brand	Mitsubishi
Model	GOT2000 Series
Category	Control Panel
Language	English