Mitsubishi GOT2000 Series - Data Copy; Display Operation of Data Copy

15.7 Data Copy
15 - 37
CONTROL OF VARIOUS DATA (DATA CONTROL)
15
15.7 Data Copy
The project data and basic system application are transferred by using an SD card.
POINTPOINTPOINT
Copy from the SD card to the GOT
Data can be copied from the SD card to the GOT when the GOT is powered on.
Refer to the following.
➠ 18.1 Installation Method When the GOT is Turned On
15.7.1 Display operation of data copy
Main menu
Main menu
Data control
Data copy
Touch [Data].
Touch
[Data copy].