7 - 2
7.1 BootOS and Basic System Application to be Installed
7.1 BootOS and Basic System Application to be Installed
Under-mentioned BootOS and basic system application are necessary to execute utility.
System application name Function overview
BootOS
Required for the control of GOT and the communication between PC and GOT.
Installed at factory shipment.
(BootOS can be installed from GT Designer3, or the SD card. When the installation has completed, the GOT is
initialized to be the factory shipment status. Also, the basic system applications must be pre-installed in the GOT
when the BootOS is installed again.)
System application
Required for the GOT operation as the monitoring function of GOT, installation and deletion of the system
application or project data, touch key control or display function of the screen and guidance.
Required for display and operation of the user-created screen and utility screen.
Not installed in GOT at factory shipment.
Install it from GT Designer3 or the data storage.
To Next Page
Loading...
