2 - 1
2
GOT BASIC SETTING
2. GOT BASIC SETTING
Setting screen for display and setting screen for operation can be displayed from the GOT utility screen.
In the setting screen for display and the setting screen for operation, the following settings can be set.
Item Description Reference
Display
Opening screen time, screen save time, battery alarm display, human sensor, sensor detect level,
sensor detect time, sensor off delay, brightness adjustment mode, brightness adjustment, POWER
LED
2.1
Language Language setting 2.2
Unique information Number setting, GOT name display, GOT description display 2.3
IP address
IP address setting, subnet mask setting, default gateway setting, operation setting for IP address
duplication
2.4
IP filter setting
IP filter usage, setting for access from IP addresses, target IP address, exception IP address,
specification of target IP address ranges
2.5
Operation
Buzzer sound, musical interval, window move buzzer volume, Key sensitivity, Access switch for the
drive A
2.6
Utility call key Call key setting, pressing time setting 2.7
USB host
USB mouse setting, interlock with mouse cursor touch operation, USB keyboard setting, USB
keyboard type setting
2.8
Time Clock setting, clock display, GOT internal battery voltage status 2.9
Controller The setting contents of the communication interface can be checked or changed. 2.10
Ethernet communication The contents of the Ethernet setting can be checked and the host can be changed. 2.11
Transparent mode Channel No. setting 2.12
Security Security level authentication 2.13
Operator authentication Operator management, password change function setting 2.14
To Next Page
Loading...
Need help?
General
