18.1 Installation Method When the GOT is Turned On
18 - 1
18
INSTALLING PACKAGE DATA BY USING AN SD CARD
18. INSTALLING PACKAGE DATA BY USING AN SD CARD
The package data stored in an SD card can be installed to the GOT by performing the following procedure.
For storing method of the package data to an SD card, refer to the following.
âž GT Designer3 (GOT2000) Help
18.1 Installation Method When the GOT is Turned On
â– 1. Operation procedure
Step 1. Power OFF the GOT, and attach the SD card
which stores the basic system application and
communication driver to the GOT.
Step 2. While touching the upper left corner of the
GOT screen, power ON the GOT.
Step 3. When the screen shown on the left appears,
select the [SD card].
For details of install, refer to the following.
âž 15.7 Data Copy
Touch
[Data copy].
To Next Page
Loading...
Need help?
General
