6.6 Operation Log Information
6 - 59
6
DATA CONTROL
6.6.3 Example of operation log information display
POINT
POINT
About the displayed file
The files other than that for operation log are not displayed on the operation log information
screen.
Numb
er
Item Description
(1) Select drive The target drive can be selected. (Even if an SD card is not installed, this message appears.)
(2) Check box If the check box is selected, up to 512 files can be selected.
(3) Kind
Indicates whether the displayed name is file or folder.
Displays the extension for a file and "DIR" for a folder.
(4) Name
Displays the file name or folder name.
For the long file/folder name, entire part may not be displayed.
Confirm the nondisplayed part with the [Rename] button, etc.
➠ Rename operation
After confirmation, touch the [Cancel] button to cancel the operation.
(5) Path name Displays the path name of drive /folder which is currently displayed.
(6) Size Displays the size of the file displayed in Name.
(7) Date and time Displays the creation date and time of each file.
(8) The size of drive Displays the size in use and the entire size of the drive which is selected by drive selection.
(9) Select all files/Cancel selection
Multiple files can be selected or canceled at once.
Touch the [Select all files] button to select all files.
If the number of the displayed files exceeds 513, the first 512 files are selected.
(10) Operation switch Execution switch of each function.
(11) Number of folders and files Displays the total number of the displayed files and folders.
(1)
(8) (10) (11)(9)
(2) (5)(3) (4) (6) (7)
To Next Page
Loading...
Need help?
General
