Mitsubishi GOT2000 Series - Communication Interface Setting (Communication Setting); Standard I;F

11.1 Standard I/F
11 - 1
COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
11
11. COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
The following communication interface setting can be configured.
11.1 Standard I/F
11.1.1 Standard I/F functions
Item Function overview Reference
Communication
setting
Standard I/F
Assigning channel number and communication driver to
communication interface
➠ 11.1
GOT IP Address Configuring GOT Ethernet setting
➠ 11.2
Ethernet communication Displaying the contents of Ethernet setting, changing the host
➠ 11.3
Comm.Monitor Checking the serial communication port communication
➠ 11.4
Ethernet check Checking the Ethernet communication port communication
➠ 11.5
Transparent mode
Setting the channel No. to be used for the communication for the FA
transparent function
➠ 11.6
Keyword
Setting or deleting sequence program protection key words and
canceling sequence program protection status for the FXCPU
connection
➠ 11.7
Function Description
Channel no. display Displays the channel number (CH No) that has been assigned by drawing software
Communication driver display Displays the communication driver that has been assigned by drawing software
Communication parameters display
Displays the communication parameters of the controllers that has been assigned by
drawing software