6 - 2
6.1 Data Type and Storage Location
■2. At maintenance
The data of the build in flash memory (Project data, etc.) can be saved even if the battery voltage becomes low.
*1 The USB memory can be used from Utility.
➠ 7.3.2 Installing using the data control function (Utility)
Item Data type Storage location
Alarm data (Alarm log file)
• Built-in SD card (A drive)
• USB drive (B drive)
*1
• USB drive (E drive)
*1
• USB drive (F drive)
*1
• USB drive (G drive)
*1
Recipe data (Advanced recipe file, Recipe file)
Logging (Logging file)
Operation log (Operation log file)
Image file (Hard copy function)
PC
GT Designer3
Resource data
Upload
Inserting/Removing
Copy
Install, Download, Write:
Upload, Read:
Alarm
Alarm
Recipe
Hard copy
Hard copy
Logging
Operation log
Operation log
Alarm
Recipe
Hard copy
Logging
GOT
SD card
(when installed
in PC)
USB memory
(when installed
in PC)
A drive
(Standard SD card),
B drive
(Extended memory card)
E drive
(USB drive)
USB memory
(when installed
in GOT)
SD card
(when installed
in GOT)
C drive
(Built-in flash memory)
Copy files on
Windows
To Next Page
Loading...
