6 - 26
6.4 Recipe Information
(b) Read recipe operation
(c) Verify recipe operation
Step 1. Touch the [Save recipe] button on the
recipe operation screen to display
the record name screen.
Touch the record name input area to
display an input key window.
Enter the name of a record to be
created.
To change the character type, touch
any of the following buttons.
[A-Z]: Uppercase alphabet
[a-z]: Lowercase alphabet
[@]: Symbols
[0-9]: Numeric characters, A to F
Step 2. Touch the [Enter] button to close the
input key window.
Step 3. Touch the [OK] button on the record
name screen to display the dialog
shown left.
Step 4. To read the device values from
controllers into the selected record,
touch the [OK] button.
To cancel the reading of the values,
touch the [Cancel] button.
Step 1. Select a record name in the file
display area.
Step 2. Touch the [Verify recipe] button on
the recipe operation screen to
display the dialog shown left.
To verify the recipe file in the GOT
against the one in the device, touch
the [OK] button.
To cancel the verification, touch the
[Cancel] button.
(Continued to next page)
To Next Page
Loading...
