Mitsubishi GOT2000 Series - Page 345

11.3 Ethernet Communication
11 - 17
COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
11
 Change of host
 Change of Net No.
Step 1. Touch the device to be set as the host.
Step 2. After the setting change, touch the [×]
key. When the screen shown on the left
appears, touch the [YES] key.
Step 1. Touch the Net No. to be changed, and
input the network No. to be changed by
the numeric keypad displayed.
Step 2. After the setting change, touch the [×]
key. When the screen shown on the left
appears, touch the [YES] key.
Touch YES.
Touch YES.