Mitsubishi GOT2000 Series User Manual

12 - 12
12.2 Operation Settings (Settings for Operation)
■3. Utility call key setting operation
POINTPOINTPOINT
(1) When the utility call key is not set (set to 0-point)
Even when the utility call key is not set (set to the zero point), you can display the main menu
by performing the following operation.
• Pressing the special function switch set on the user-created screen
➠ 9.3.1 Display operation of main menu
(2) When limiting the display and operation of the utility
When limiting the display and operating users, set a password to the GOT using GT
Designer3. If a user tries to display the main menu of the utility, the password is displayed.
Refer to the following for the details related to the password setting.
➠ GT Designer3 (GOT2000) Help
Step 1. Touch or displayed at the
four corners of the setting screen. The
button repeats every
time it is pressed. Change the part to
be set as a key position to .
For the key position, 0 or 1 point can
be specified.
Step 2. When setting 1 point, specify the time
to switch to the utility in case of
keeping pressing the key position.
Touch the time input area.
Step 3. Touching the input area displays a
keyboard.
Input numeric with the keyboard.
Step 4. Touch the button to save the
changes.

Mitsubishi GOT2000 Series Specifications

General

Brand	Mitsubishi
Model	GOT2000 Series
Category	Control Panel
Language	English