13 - 2
13.1 Security Level Authentication
■3. Security level change operation
(1) Input operation of password
About forgetting to return to the original level after changing security level temporarily
When use GOT after temporarily changing the security level, do not forget to return the security
level to the original level.
Step 1. By touching [0] to [9], [A] to [F] key, the
password of the changed security level
is input. Character types to be input
can be changed by touching the [KEY]
button.
Step 2. When correcting the input character,
touch [Del] key to delete the correcting
character and input the password
again.
Step 3. After inputting password, touch the
[Enter] key.
When the password is not matched,
displays the error message.
Step 4. If [OK] button is touched it returns to
the password input screen again.
Step 5. If the button is touched, it returns
to the security setting screen.
To Next Page
Loading...
