16.1 Device Monitor Function
16 - 5
GOT SELF CHECK (DEBUG)
16
■2. Key functions
The following table describes the key functions displayed on the device monitor screen.
Key switch Function
DEV
Switches the screen to the device registration key window for registering devices to be
monitored.
➠ 16.1.7 Device registration
TEST
Switches the quick test mode between enabled and disabled states.
➠ 16.1.8 Quick test
DEC/HEX
Switches the numerical notation of word device values between decimal and
hexadecimal numbers.
CH1 or CH2 Switches the channel to be displayed.
Scrolls the data list up and down by one line and displays the devices before or after
the device which is currently registered and placed in the top or bottom line.
: Scrolls the list up by one line to display the device number right before the device
number displayed in the top line.
: Scrolls the list down by one line to display the device number right after the device
number displayed in the bottom line.
Exits the device monitor, and then the screen returns to the debug screen.
To Next Page
Loading...
