2.7 Utility Call Key
2 - 25
2
GOT BASIC SETTING
(2) Precautions on using the alarm popup display
When [Display Position Switching] is set to [Switch] in the alarm popup display setting, set
either of the following for the utility call key.
• Setting the position of the utility call key to the upper-right or lower-left corner
• Setting [Pressing Time] of the utility call key to 1 or more seconds
When [Pressing Time] is set to 0 and the key position is set to the lower-left corner, the
operation is as described below. If the positions of the key and the alarm popup display
overlap, the utility screen appears by switching the display position of the alarm popup
display.
For the alarm popup display, refer to the following.
➠ GT Designer3 (GOT2000) Help
To Next Page
Loading...
