2.11 Ethernet Communication
2 - 51
2
GOT BASIC SETTING
■2. Change of host
■3. Change of Net No.
Step 1. Touch the device to be set as the host.
Step 2. Touch the [OK] button to restart the
GOT to operate with the changed
settings.
TTouch the [Cancel] button to cancel
the changed settings and return to the
[Controller] screen.
Step 1. Touch the Net No. to be changed, and
input the network No. to be changed by
the numeric keypad displayed.
Step 2. Touch the [Enter] button and [OK]
button to restart the GOT to operate
with the changed settings.
Touch the [Cancel] button to cancel the
changed settings and return to the
[Basic Setting] screen.
To Next Page
Loading...
