2 - 56
2.13 Security
■3. Setting operation of security level
(1) Password input operation
About forgetting to return to the original level after changing security level temporarily
When use GOT after temporarily changing the security level, do not forget to return the security
level to the original level.
Step 1. By touching [0] to [9], [A] to [F] key, the
password of the changed security level
is input.
Step 2. When correcting the input character,
touch [Del] key to delete the correcting
character and input the password
again.
Step 3. After inputting password, touch the
[Enter] key.
When the password matches, the
normal completion message is
displayed.
When the password is not matched,
displays the error message.
Step 4. If [OK] button is touched it returns to
the password input screen again.
Step 5. If [×] button is touched it returns to
security setting screen.
To Next Page
Loading...
