7 APPLICATION INSTRUCTION
7.7 Real Number Instruction
443
7
Calculating the tangent of single-precision real number
TAN(P)/DTAN(P)
These instructions calculate the tangent of the angle specified by (s), and store the operation result in the device specified by
(d).
The TAN(P) instructions can also be used as DTAN(P).
*1 The TAN instruction is not supported by the ST language. Use TAN of the standard function.
Page 773 TAN(_E)
■Descriptions, ranges, and data types
■Applicable devices
• These instructions calculate the tangent of the angle specified by (s), and store the operation result in the device specified
by (d).
• Set the angle data in radians (angle180).
• The table below shows the related devices.
When the angle specified by (s) is /2 radian or (3/2) radian, no error occurs because an operation error occurs in a radian
value.
Ladder diagram Structured text
*1
ENO:=TANP(EN,s,d);
Operand Description Range Data type Data type (label)
(s) Angle data or head device number where the angle data is
stored
Single-precision real number Single-precision real number
(d) Head device number for storing the operation result Single-precision real number Single-precision real number
Operand Bit Word Double word Indirect
specification
Constant Others
X, Y, M, L,
SM, F, B, SB
U\G T, ST,
C, LC
T, ST, C, D,
W, SD, SW, R
U\G Z LC LZ K, H E $
(s)
(d)
Device Name Description
Condition Operation
SM700 Carry The absolute value of the operation result 2
128
The value of (d) is the maximum value (2
128
) of 32-bit real
numbers and the carry flag SM700 turns on.
SM8020 Zero The operation result is true "0".
(The mantissa part is "0").
The zero flag SM8020 turns on.
SM8021 Borrow The absolute value of the operation result < 2
-126
The value of (d) is the minimum value (2
-126
) of 32-bit real
numbers and the borrow flag SM8021 turns on.
SM8022 Carry The absolute value of the operation result
2
128
The value of (d) is the maximum value (2
128
) of 32-bit real
numbers and the carry flag SM8022 turns on.
(s)+1 (s) (d)+1 (d)
TAN ( )
Single-precision real number Single-precision real number