508
7 APPLICATION INSTRUCTION
7.14 Pulse related instruction
• The measurement time specified by (S2) overwrites the value stored in the SD device specified for the measurement unit
time.
• When the measurement time specified by (S2) is outside the range from 1 to 2,147,483,647, the specified measurement
time is rounded into “1” with the sign.
Error code
(SD0/SD8067)
Description
3600 The channel number or device number in which parameters are not set in (s1) is specified.
3405 An unavailable bit device is set in (s1).
A channel number other than 1 to 8 is specified in (s1).
1810 The input specified in (s1) is already used by another instruction.
To Next Page
Loading...
