Motorola MC909X User Manual

9 - 28 MC909X Integrator Guide
Misc(3) Tab
Use this tab to configure various miscellaneous features.
Figure 9-39 Misc (3) Tab
Misc(4) Tab
Use this tab to configure various miscellaneous features.
Wait Welcome This check box specifies whether the AirBEAM Smart Client waits for the WELCOME windows to
be completed before automatically launching the synchronization process after a reset.
Close Apps This check box specifies whether the AirBEAM Smart Client automatically attempts to close
non-system applications prior to resetting the mobile unit. If enabled the AirBEAM Smart Client
sends a WM_CLOSE message to all non-system applications before resetting the mobile unit. This
feature offers applications the opportunity to prepare (i.e. close open files) for the pending reset.
Table 9-7 Misc (3) Tab Descriptions
Field Description
Use DHCP
server
This check box control specifies whether the AirBEAM Smart Client uses the DHCP response
option 66 to specify the IP address of the FTP/TFTP server.
If enabled, special RF network registry settings are required to force the DHCP server to return
the “TFTP server name” field (option 66). The special RF network registry settings are included,
but commented out, in the radio network registry initialization files (essid_xxxx_yy.reg).
Use DHCP
bootfile
This check box control specifies whether the AirBEAM Smart Client uses the DHCP response
option 67 to specify the Package and Package 1 parameters.
If enabled, special RF network registry settings are required to force the DHCP server to return
the “Bootfile name” field (option 67). The special RF network registry settings are included, but
commented out, in the radio network registry initialization files (essid_xxxx_yy.reg).
Table 9-6 Misc(2) Tab Descriptions (Continued)
Field Description

Motorola MC909X Specifications

General

Brand	Motorola
Model	MC909X
Category	Handhelds
Language	English