Getting Started 2 - 43
S31 General Bit Mapped Options Status - 195 (C0h)
S36 LAPM Failure Control - 7 *
S38 Delay Before Forced Hangup 0-255 20 S
S39 Flow Control Bit Mapped Options Status - 3
S40 General Bit Mapped Options Status - 104 (68h) *
S41 General Bit Mapped Options Status - 195 (C3h) *
S46 Data Compression Control - 138 *
S48 V.42 Negotiation Control - 7
S86 Call Failure Indication 0-26 0
S91 PSTN Transmit Attenuation Level 0-15 10** dBm
S92 Fax Transmit Attenuation Level 0-15 10** dBm
S95 Extended Result Codes Control 0 *
S210 V.34 Symbol Rate 0-255 13 (0Dh)
Table 2-11
S-Register Settings (Continued)
Reg Function Range
Default
Units
Default Saved
* Register value may be stored in on of two user
** Country-dependent
To Next Page
Loading...
