Why aren't the buttons working on my Motorola MC909X Handhelds?
If tapping the window buttons or icons on your Motorola Handhelds does not activate the corresponding feature, it could be because the LCD screen is not aligned correctly (re-calibrate the screen) or the system is hung (warm boot the system).
Why is data not transmitting correctly on my Motorola Handhelds?
If data is not being transmitted correctly on your Motorola Handhelds, it could be because the mobile computer was removed from the cradle or unplugged from the host computer during communication (replace the mobile computer in the cradle, or reattach the Synchronization cable and re-transmit), the cable configuration is incorrect (see the System Administrator), the communication software was incorrectly installed or configured (perform setup), or Microsoft ActiveSync 4.1 or greater is not installed on the host computer (ensure that Microsoft ActiveSync 4.1 or greater is installed on the host computer).
What to do if my Motorola MC909X says memory is full?
If your Motorola Handhelds displays a message stating that the memory is full, it could be due to too many files stored on the mobile computer (delete unused memos and records; you can save these records on the host computer) or too many applications installed on the mobile computer (if you have installed additional applications on the mobile computer, remove them to recover memory; for Windows Mobile 5.0 devices, tap Start > Settings > System tab > Remove Programs icon; for WinCE 5.0 devices, tap Start > Settings > Control Panel > Remove Programs icon; select the unused program and tap Remove).
Why is my Motorola MC909X not scanning?
Your Motorola Handhelds device may not be scanning due to several reasons: the scanning application might not be loaded (verify that the unit is loaded with a scanning application), the bar code may be unreadable (ensure the symbol is not defaced), the distance between the exit window and the bar code may be incorrect (ensure the mobile computer is within proper scanning range), the mobile computer may not be programmed for the bar code (ensure the mobile computer is programmed to accept the type of bar code being scanned), the mobile computer may not be programmed to generate a beep (check that the application is set to generate a beep on good decode), or the battery may be low (check the battery level).
Why doesn't the charge indicator LED light up on my Motorola MC909X?
The charge indicator LED on your Motorola Handhelds may not light up because the cradle is not receiving power (ensure the power supply is securely connected and receiving power), the mobile computer is not seated correctly in the cradle (ensure the battery is properly installed in the mobile computer, and re-seat the mobile computer in the cradle), or the battery in the mobile computer is faulty (verify that other batteries charge properly; if so, replace the faulty battery).
Why does my Motorola Handhelds keep turning off?
Your Motorola Handhelds device might be turning off automatically due to the following reasons: the mobile computer could be inactive (the mobile computer turns off after a period of inactivity, which can be set to different durations depending on whether it's running on battery or external power; check the power settings to adjust this), the battery might be depleted (replace the battery), or the battery is not inserted properly (insert the battery properly).
Why is my Motorola MC909X Handhelds rechargeable lithium-ion battery not charging?
Your Motorola Handhelds rechargeable lithium-ion battery may not be charging because the battery failed (replace the battery; if the mobile computer still does not operate, try a warm boot, then a cold boot) or because the mobile computer was removed from the cradle while the battery was charging (insert the mobile computer in the cradle and begin charging; the lithium-ion battery requires less than four hours to recharge fully).
General| Manufacturer | Motorola |
|---|---|
| RAM | 128 MB |
| Storage | 256 MB Flash |
| Wireless Connectivity | 802.11a/b/g, Bluetooth |
| Battery | Rechargeable Lithium Ion |
| Expansion Slots | SD Card Slot |
| Keyboard | Numeric keypad |
Provides information on setting up and configuring MC909X mobile computers and accessories.
Outlines the different guides available in the documentation set for the MC909X.
Lists and describes the various configurations of the MC909X mobile computer.
Details the different software versions and references covered in the guide.
Information on charging the mobile computer battery and resetting.
Describes available accessories and setup for power and charging.
Instructions for installing ActiveSync and setting up partnerships.
Instructions for using and configuring the mobile computer on a wireless network.
Provides contact information and procedures for equipment service and support.
Instructions for carefully removing protective material and verifying all received equipment.
Details the procedure for installing the main battery into the mobile computer.
Provides instructions and safety guidelines for charging the main and backup batteries.
Instructions on how to turn on the mobile computer using the Power button.
Explains warm boot and cold boot functions for Windows CE 5.0 devices.
Introduces Series 9000 accessories like cradles, keypads, and modules.
Lists optional keypads and their compatibility with different MC909X models.
Describes different types of cradles and their functionalities.
Step-by-step instructions for removing and replacing a keypad.
Describes the single slot serial/USB cradle and its capabilities.
Details the setup and use of the four slot Ethernet cradle for charging and data communication.
Describes the setup and use of the MDM9000 Modem Module.
Instructions for downloading and installing ActiveSync from the Microsoft website.
Steps to set up mobile computer communication with a host computer via serial or USB.
Steps to start ActiveSync on the host computer.
Procedure to set up a partnership with a Windows CE 5.0 device using ActiveSync.
Instructions for synchronizing data with a Windows Mobile 5.0 device.
Explains Wireless Local Area Networks (WLANs) and the wireless applications available.
Explains the Signal Strength icon and its descriptions for wireless signal strength.
Procedures for disabling and enabling the WLAN radio for Windows Mobile 5.0.
Utility to discover available networks and view their signal strength and encryption type.
Wizard to create or edit wireless profiles, setting values for selected networks.
Dialog box to configure authentication types like PEAP, TTLS, LEAP, None.
Dialog to configure network address parameters like IP, subnet, gateway, DNS, WINS.
Dialog to select power consumption settings for the wireless LAN.
Window to manage user-configured wireless profiles.
Application to display information about the wireless connection.
Allows testing a connection at the network layer using ICMP Ping.
Steps to verify MC9094 phone and data services using a SIM card.
Steps to set up a GPRS data connection for Internet access across a wireless network.
Steps to establish a data connection after configuring GPRS settings.
How to customize phone settings like ring type, tone, and security options.
How to enable and change the PIN for phone usage.
How to configure settings for subscribed phone services like call barring and caller ID.
Indicates mobile computer connection to the Nextel network.
How to set preferred networks in order of access.
Steps to verify MC9097 phone and data services using a SIM card.
Steps to set up an iDEN data connection for the MC9097.
Steps to establish an iDEN data connection after configuration.
How to customize phone settings like ring type, tone, and security options.
How to enable and change the PIN for phone usage.
How to configure settings for subscribed phone services like call barring and caller ID.
Instructions for forwarding incoming calls to a different phone number.
Using the GPS tab for diagnostics and refresh settings.
How to view system information using the Sys Stat tab.
How to view registration information using the Reg Stat tab.
How to access diagnostic information and tools via the Error Log tab.
Software required on PC for developing CE applications.
Instructions to download and install the Device Configuration Package for MC9090.
Required Platform SDKs for Microsoft Windows CE 5.0 development.
Using ActiveSync to copy files from a host computer to the mobile computer.
Using TCM to customize flash file system partitions for the mobile computer.
Downloading the built hex image to the mobile computer using IPL.
Table of common TCM errors and their solutions.
How IPL detects errors during data reception and aborts download.
How to create and load custom splash screens using bitmap files.
Driver allowing registry edits and persistence over cold boots.
Driver copying files from one folder to another during a clean boot.
Using TCM to specify hex destination files and download them via IPL.
Security policies determining application trust level and signing requirements.
Provides a way to authenticate authors and ensure application authenticity.
Enforcing the "trusted" model using XML provisioning.
Using XML provisioning to add certificates to certificate stores.
Combining application files into a single package (CAB file) for easier deployment.
Steps to install an application package using ActiveSync.
Updating operating system components using update packages.
Process of setting up the mobile computer to download packages using the Rapid Deployment (RD) Client.
Facilitates software downloads via Mobility Services Platform (MSP) Console’s FTP server.
How the mobile computer scans RD bar codes for configuration and downloads.
Staging without bar codes using On-Demand Staging (Electronic Staging).
Responsible for device-side provisioning activities defined by a policy.
Displays packages installed on the mobile computer.
Tips for trouble-free service, including screen care and temperature protection.
Precautions for charging areas and using compatible batteries and chargers.
Common problems and solutions for mobile computer operation.
Troubleshooting for issues finding or connecting to Bluetooth devices.
Troubleshooting for modem communication and ActiveSync failures.
Table summarizing the mobile computer's technical specifications.
Details CPU, OS, Memory, Environment, Drop, Tumble, Sealing, ESD.
Specifications for WLAN radio, channels, security, voice communication, power, data rate, frequency range, and antenna.
Features for EDGE/GPRS and iDEN radio modules, including fax, data, SMS, and voice specs.
Lists supported laser and imaging decode capabilities.
Diagram and table detailing the pin locations and functions of the mobile computer.
Steps to run and configure iDockIt on Windows Mobile 5.0 devices.
Enabling iDockIt to control cradle events and automatically connect.
Establish Internet/Intranet connection or launch application via Ethernet cradle.
Automatically synchronize or connect to host computer via serial/USB cradle or cable.
Connect to remote host/network or synchronize via ActiveSync using a modem cradle.
Procedures for uninstalling iDockIt on Windows Mobile 5.0 and CE 5.0 devices.
To Next Page
