Training Guide Course No. 196514
Level 2 Maintenance, X-1000 Series Dispensing Systems 2-63 P/N 196515 (Revision A)
Lesson 2-8
Conveyor Operations
A. Introduction
The Conveyor is used to move parts into and out of the dispensing area. All X-
1000 Dispensing Systems are equipped with a Surface Mount Equipment
Manufacturers Association (SMEMA) compatible belt conveyor.
B. Enabling Objective
2.8 Understand the conveyor theory of operation and setup and level the
conveyor.
C. Topic Outline
1. Introduction
2. Overview
 Conveyor Configuration
 Stop Pins/Clamp Bars
 SMEMA Communication
 Detailed Operation
3. Summary and Review
To Next Page
Loading...
Need help?
General