Training Guide Course No. 196514
Level 2 Maintenance, X-1000 Series Dispensing Systems 5-1 P/N 196515 (Revision A)
Lesson 5-1
Removing and Replacing Fuses
A. Introduction
There are approximately fourteen replaceable fuses on the X-1000 Dispensing
Systems depending on the configuration. All locations are clearly labeled.
B. Enabling Objective
5.1 Locate fuses on X-1000 Dispensing Systems and perform the procedure
to replace them.
C. Topic Outline
1. Introduction
2. Overview
 Replaceable Fuses
 Board Mounted
 Panel Mounted
 Box Mounted
3. Summary and Review
To Next Page
Loading...
Need help?
General