Training Guide Course No. 196514
Level 2 Maintenance, X-1000 Series Dispensing Systems 3-5 P/N 196515 (Revision A)
Lesson 3-2
Purge Boot and Weigh Station Maintenance
A. Introduction
The plastic cups in the Purge Boot and Weigh Station should be replaced on a
daily basis. In addition the purge boot must be cleaned and the banjo wiper
replaced.
B. Enabling Objective
3.2 Identify the procedure to replace the Purge and Weigh Station cups,
Banjo Wipe and Purge Boot.
C. Topic Outline
1. Introduction
2. Overview
Replacing the Purge and Weigh Stations Cups and Banjo Wipe
Replacing the Purge Boot
3. Summary and Review
To Next Page
Loading...
